| Issue Date | Title | Author(s) |
| 1 | 2021 | A Brief Review on the Evolution of Metallic Dental Implants: History, Design, and Application | Kandavalli, Sumanth Ratna; Wang, Qingge; Ebrahimi, Mahmoud; Gode, Ceren ; Djavanroodi, Faramarz; Attarilar, Shokouh; Liu, Shifeng |
| 2 | 2021 | Concurrent Enhancement of Strength and Corrosion Resistance in Ultrafine-Grained Al6063 Tubes | Ebrahimi, M.; Gode, C. ; Attarilar, Sh.; Berjis, R. |
| 3 | 2022 | Cyclic Extrusion Compression Process for Achieving Ultrafine-Grained 5052 Aluminum Alloy with Eminent Strength and Wear Resistance | Wu, Jianxin; Ebrahimi, Mahmoud; Attarilar, Shokouh; Gode, Ceren ; Zadshakoyan, Mohammad |
| 4 | 2014 | Damage prediction of 7025 aluminum alloy during equal-channel angular pressing | Ebrahimi, M.; Attarilar, S.; Göde, Ceren ; Djavanroodi, F. |
| 5 | 2021 | Design and Manufacturing of The Prototype System for Recycling Waste Generated in 3 Dimensional Production to Filaments by Fused Deposition Modeling Method | Ertuna, İlker; Topçu, Uğur Can; Açıkgöz, Defne; Cırık, Ezgi; Göde, Ceren |
| 6 | 2017 | Determination of rutin by CoFe2O4 nanoparticles ionic liquid nanocomposite as a voltammetric sensor | Yola, M.L.; Göde, Ceren ; Atar, Necip |
| 7 | 2012 | The effect of extrusion and high-pressure torsion on the properties of Alumix-231 | Ozdemir, I.; Göde, Ceren ; Yilmazer, H.; Çallıoğlu, Hasan |
| 8 | 2024 | Effect of Surface Condition on Fatigue Life of 7075 Aluminium Alloy | Hosseini, Seyedrasoul; Farajollahi, Masoud; Gode, Ceren ; Ebrahimi, Mahmoud; Wang, Qudong |
| 9 | 2019 | Effects of Casting Speed on Thin Gauge Foil Surface Quality of 8079 Aluminum Alloy Produced by Twin Roll Casting Method | Malcioglu, A.U.; Dogan, C.; Inel, C.; Göde, Ceren |
| 10 | 2011 | Effects of cold pressing and extrusion on the microstructures and mechanical properties of SiC and B4C reinforced alumix-231 alloys | Çallıoğlu, Hasan ; Ozdemir, I.; Göde, Ceren |
| 11 | 2020 | Enhancing Mechanical Properties and Corrosion Performance of Aa6063 Aluminum Alloys Through Constrained Groove Pressing Technique | Fan, Ren-jie; Attarilar, Shokouh; Shamsborhan, Mahmoud; Ebrahimi, Mahmoud; Gode, Ceren ; Ozkavak, Hatice Varol |
| 12 | 2021 | Enhancing mechanical properties of consolidated nanocrystalline copper powder by means of equal channel angular pressing method | Gode, Ceren |
| 13 | 2018 | Equal channel angular extrusion for tube configuration of Al-Zn-Mg-Cu alloy | Ebrahimi, M.; Shaeri, M.H.; Naseri, R.; Göde, Ceren |
| 14 | 2022 | Equal channel angular pressing of wire-formed Al6063 by PU rubber-assisted procedure | Ebrahimi, Mahmoud; Attarilar, Shokouh; Ozkavak, Hatice-Varol; Gode, Ceren |
| 15 | 2019 | Evaluating influence degree of equal-channel angular pressing parameters based on finite element analysis and response surface methodology | Ebrahimi, M.; Pashmforoush, F.; Göde, Ceren |
| 16 | 2015 | Experimental investigation of the equal channel forward extrusion process | Ebrahimi, M.; Djavanroodi, F.; Tiji, S.A.N.; Gholipour, H.; Göde, Ceren |
| 17 | 2021 | Influence of a low-temperature Plastic-deformation process on the microstructure of an Al-Si-Mg aluminum alloy | Gode, Ceren |
| 18 | 2020 | An insight into the vibration-assisted rolling of AA5052 aluminum alloy: Tensile strength, deformation microstructure, and texture evolution | Attarilar, S.; Ebrahimi, M.; Hsieh, T.-H.; Uan, J.-Y.; Göde, Ceren |
| 19 | 2019 | An investigation into the effect of alloying elements on corrosion behavior of severely deformed Cu-Sn alloys by equal channel angular pressing | Ebrahimi, M.; Attarilar, S.; Shaeri, M.H.; Göde, Ceren ; Armoon, H.; Djavanroodi, F. |
| 20 | 2014 | Investigation of the penetration behavior of alsi7 foam, produced by powder metallurgy method, under low-velocity impact energies | Çinici, Hanife; Gökmen, Uğur; Uzun, Arif; Karakoç, Halil; Göde, Ceren ; Türker, Mehmet |
Loading...
5
0
20
0
false